The Xbox One has already been a wonderful package itself. However, with games like Cod 5, Modern Warfare, and Cod : mw2, a lot more people find good reasons to customize the said game console, or its accessories. The type of modification is a reaction to build a rapid fire modded Xbox controller. Listed here are the steps on the way to modify your original controller to some rapid fire controller.
Step 1. Unscrewing the controller
Prior to starting taking your controller apart, take a close look at the controller first and try to remember which parts go where since you will eventually have to put everything returning. Start by unscrewing each of the visible screws at the back. Following this, prior to deciding to tug on the case, get rid of the batteries to show the hidden screws. Remove these as well.
2. Preparing true
With all the controller facing down, slowly and carefully separate the leading 50 % of the casing through the circuit board. A hole in the case will eventually are necessary. Remember this before putting things back.
3. Placing The Rapid Fire Button
While other ways of modifying the controller do not involve installing a whole new button, this type of guide does. In addition this provide help to adjust the pace of rapid fire, it minimizes tampering along with other parts of the circuit board, thereby minimizing the potential risk of damaging your modded Xbox controller.
Remember, kits for your rapid fire controller can be bought easily. ps4 rapid fire controllers is the button using this kit that will be placed with the hole within the casing, so place it gently before the circuit board is returned. You may have to snip out several flaps to produce way for the wires from the kit. You can do this with the cutter or perhaps a pair of scissors.
Step 4. Soldering
Let’s assume that you are aware how to correctly start using a soldering iron, attach the red wire for the leftmost pin of your 4-pin horizontal series, whilst the blue wire solders on the rightmost pin of the identical series. The black (or green occasionally) wire attaches for the middle of the three vertical series right of the switch.
Soldering is easily the most crucial the answer to making the modded Xbox One controller. For the reason that mistakes made with this stage can permanently damage your controller.
Step . 5. Putting everything back
Carefully considering the wires, make an effort to close the circuit board as well as the casing. Pest little tricky for the reason that new wires will get with respect to things. Find a method of these wires to occupy the empty spaces as an alternative to sticking out. You could contain the modded Xbox One controller facedown so the buttons don’t fall and maneuvering the wires are a little easier. Place the casings together try not to return the screws yet.
Congratulations, you must find out if the rapid fire buttons work. When they don’t, you may want to restart your console and also the now modded Xbox controller. This should solve the issue. When it doesn’t you might need to go with the steps again to check.
Check out about xbox one modded controllers net page: read this.