Some Information About Tungsten Carbide Burrs And The Way To Apply Them

The carbide Burrs are primarily found in deburring, that is removing burrs, sharp edges, and excessive materials in addition to grinding, shaping, and cutting of materials.

In this article, we’ll be taking a look at facts about the tungsten carbide burrs that you need to know and the ways to utilize them.

Let’s get started!

1. Carbide Burrs may be used on a great deal of Materials


Tungsten carbide burrs is utilized in an array of materials including all sorts of wood, plastics like the Glass fiber Reinforced Plastic (GRP), carbon fiber reinforced plastic (CRP), fiberglass, acrylics and metals including cast iron, aluminum, and steel. Carbide burrs are perfect for soft metals including silver, platinum, and gold while they have a very long duration without any breaking or chipping. Metals include titanium, nickel, cobalt, zinc, and more.

Exactly what are Carbide Burrs Found in?

Carbide burrs are typically found in air tools such as pneumatic rotary tools, die grinders and high-speed engravers. Others add the hobby rotary tools, flexible shafts, pendant drills, and micro motors.

Uses of Carbide burrs

Generally, the carbide burrs find application in a wide array of industries amongst which include the metal smith, dental, automotive, aerospace industries plus more. In these industries these are typically employed for sculpting, cylinder head porting, grinding, deburring, casting, chamfering, welding, creating jewelry, wood carving, model engineering, tool making, and also other metalwork.

2. Carbide Burrs are generally obtainable in Two Cuts; Single Cut and Double/Diamond Cut

With all the right-handed spiral flute, the Single cut carbide burrs, also referred to as normally the one flute, will remove material quickly having a smooth finish. They’re basically used in combination with ferrous metals, iron, copper, hardened steel, and stainless-steel. They’re suited to deburring, milling, and stock removal.

However, the double cut carbide burrs sometimes referred to as cross cut or diamond cut because of the 2 flutes cut across one another usually are applied to all non-metal materials such as wood and plastics, ferrous and non-ferrous metals, soft steel and aluminum. The double cut carbide burrs produce smaller chips because they cut away the material hence leaves a smoother finish as opposed to single cut.

3. Carbide Burrs Shapes

The cut or profile you are planning to achieve will help you make your selection of what model of carbide burr to use. Here is a report on the many carbide burr shapes:

· Carbide Ball Burrs

· Carbide Inverted Cone Burrs

· Carbide Tree Burrs

· Carbide Pointed Cone & Ball Nose or Carbide Round Nose Burrs

· Oval Burrs

· Cylinder Burrs. End/Ball nose/ Round Nose Cut

· Flame Burrs

· Countersink Burrs

· Oblate Spheroid

4. Usually do not Apply Too Much Pressure

Little pressure needs to be applied. This really is to prevent chipping outside the cutting edges and reduction in the life span from the burr.

5. At what speed (RPM) should the Carbide Burrs be utilized?

The contour is made as well as the material being done determines the speed at which you have your carbide burr emerge your rotary tool. However, the burr needs to be started slowly while improving the speed because you progress. The rate ought not exceed 35,000 RPM.
For more information about SE-1 Carbide Burrs see our web portal

Leave a Reply