At the receiving end and Pass Technique is by far (i mean by the really long way) the most effective method for building a REAL log home.
We are should you have dropped by because you have did start to browse around for information about how best to make a log home / home. Well I really hope the information you find on my small website answers your queries if not why don’t you ask me, I’d personally be happy to answer any question you could have on building a log home especially for the butt and pass method.
At the receiving end and Pass technique is the best and needs minimal maintenance
Few people in today’s world contain the necessary craftsmanship background nor the requisite period of time it will take to understand traditional scribing and notching. Fortunately you do not have to become master craftsman so that you can make a very high-quality log structure in relatively little time.
Today you will find inexpensive materials available that greatly simplify the operation of log home building in order to placed a house with little or no when it comes to skill, time, or money. Logs are peeled, sometimes dried, cut to length, hauled in place, then drilled and pinned. With all the log home, you use a huge electric drill, a great deal of cheap reinforcing bar (referred to as “rebar”), along with a sledge hammer to pin the logs along with essentially no scribing, no notching, with no close fitting. The ultimate technique is stronger and much more stable when compared to a scribed and notched log home.
A login one wall butts facing a login another wall, overlapping like brickwork the corners. The logs are held along with rebar pins, drilled and nailed through from log to the next, in the corners and each two feet along each log. At the receiving end and pass method doesn’t have any vulnerable notches for rot to create in, and all the logs are really tightly pinned along with rebar that there’s no settling. The window and door frames may be nailed straight to the logs without worry. The area involving the logs is insulated with strips of fiberglass insulation, then engrossed in sand and cement chinking mortar.
Besides being fast, durable, and economical, at the receiving end and pass approach to log home building requires relatively few tools. The truth is, most of the necessary tools would easily fit in the back of an car! And although mansion logs could possibly be heavy, you can easily lift them in place with no crane. Which has a block and tackle pulley system attached to a lifting pole at each and every corner of the home, you can easily wrap a strap around a log and hoist it in to the air, either manually, or by attaching the haul rope to a truck. Drive backwards slowly and also the log floats in place.
When built correctly, a butt and pass log home can outlive any other type of log house, and it doesn’t require endless coats of stain or another sealants to guard the logs from decay.
For additional information about log home take a look at this site: this site