The primary things the do-it-yourselfer realizes when studying how to build a drywall ceiling is always that no man is surely an island – unless he makes use of rented equipment! Since the panels are big, bulky, and awkward, hanging drywall on a ceiling entails one or the other: the assistance of someone else or renting a drywall jack from the local hardware store. The cable mechanism on drywall jacks is not challenging to operate, and jacks do a fantastic job of holding the drywall in a secure, flat position helping you to quicker attach it for the ceiling.
Tools & Materials
How to build a Drywall Installation Video includes understanding what all tools and material you will need. Along with either someone else to assist you or a drywall jack, you’ll also have to have a hammer, a drill with a screwdriver bit, and nails or screws for drywall. You’ll also, needless to say, need to measure your ceiling (twice!) and purchase enough drywall, such as a little extra in case of mistakes, for the job.
Mark Joists First
Find the boards – usually 2x4s or 2x6s – that function as ceiling joists by tapping across the wall studs with a hammer and following in the wall for the ceiling. Included in learning to make a drywall ceiling, mark where these boards can be found with a pencil. These are what you should be attaching the drywall to and marking them beforehand helps it be quicker to locate them than trying to find them when you are nailing or screwing about the drywall. Then you definately need to measure the place that the fitting continues the drywall and cut out an opening to allow for that portion of the ceiling.
The Tough Part
Now’s the part in mastering how to build a drywall ceiling where you will need your partner (who hopefully has a good amount of stamina in addition to strength!) to carry the drywall to the ceiling as well as to squeeze drywall panel about the jack. Placed the end from the sheet of drywall – featuring its finished side facing down – in the center from the ceiling board (joist) this agreement you are going to nail it. Nail across the outside of the panel about a half an inch from the edges in order to avoid the drywall from splitting or cracking. The person who is holding the panel can now move or, should you be using a jack, you can move it out of the way.
Help it become Pretty
Countersink nails or screws at six- or seven-inch intervals all across the entire joist this agreement the drywall may be attached. Countersinking enables you to hide the heads from the nails/screws with compound to ensure that when you paint, the heads won’t be whatsoever visible. While not really a portion of finding out how to construct a drywall ceiling, learning to hide ugly nail or screw heads serves its purpose for overall general carpentry knowledge.
More information about Drywall Installation Video go the best web site: learn here